泵提供平穩的流量且沒有脈衝

高純度的 laminar 泵,適用在先進的化學製程

LHA系列規格表

爆炸圖

LHA030 爆炸圖

泵訂購說明

LHA030 訂購說明
獲取報價單本地經銷商

概述

LHA系列泵提供高達30 LPM的穩定流量,並擁有安全加工的Teflon® PTFE和PFA流體路徑之特點。泵的的工作溫度至高可以到100°C (212°F) 的流體溫度,空氣供應壓力5.5 Bar (80 psi),揚塵可以達到3米。

特點和優點

  • Laminar 泵流量至高到30 lpm
  • 過程安全的Teflon® PTFE和PFA液體通路
  • 無橡膠O形圈、不漏水、無需緊固
  • 操作可靠, 無漏液的密封設計
  • 類比訊號來偵測運行狀況
  • 光纖和電阻式測漏感測器都是可用的
  • 聚合物的置具將磨擦減到最小並延長壽命
  • 各種液體連接選項的
  • 堅固的波紋管技術是經過驗證的
  • 5.5公斤(80psi)氣壓
  • 悶打的操作
  • 吸液高度為3米
  • 最少的零件耐用的設計
  • 耐用的機械設計
  • 易於安裝
  • 100級潔淨室裝配、測試和封裝
  • 在兩年的保固期內不會有任何預防性維護
White Knight 兩年期的保固
CE認證
5.5 公斤(80 psi) 氣壓
最高100°C度

泵的性能

*Graph is for reference only. Performance was measured utilizing 1/2 in (3/8 in ID) air line and 1-1/4 in (1-1/8 in ID) liquid lines with 1 ft flooded suction. Performance may vary in your system.

泵的尺寸

下載 LHA030 的外形尺寸 (PDF)

泵的規範

Model
LHA030
Flow Rate*
≤ 31 lpm (8.2 gpm)
Air Connection
1/4" FNPT
Fluid Temperature
≤ 100°C (212°F)
Supply Air Pressure
≤ 5.5 bar (80 psi)
Startup Air Pressure
≥ 1.4 bar (20 psi)
Required Air Volume
≥ 26 SCFM
Suction Lift*
3 m (10 ft)
Fluid Path Materials
PTFE, PFA
Non-Fluid Path Materials
PTFE, PFA, PP, Viton, Neodymium, PET-P, UHMW
Stroke Detection Options
Hall Effect Sensor (NPN or PNP)
Leak Detection Options
Fiber optic with or without sensor, or conductivity
Electronic Control
Call for details
Air Requirements
Air SignalsTwo 5-way valves (center vent) or Four 3-way valves (normally closed)
Valves with metal seals are recommended for longer life
Electrical Requirements
24 VDC Power
Power consumption depends on current draw on external devices:
  • Controller power alone 4 watts
  • Max Digital Output current (500 mA sourcing or 24 mA sinking)
  • Max Analog Output current (10 mA total voltage output or 20 mA with 4-20 mA conversion board)
Pump Connections
  • Four air connections 1/4-in NPT with quick exhaust connectors (one fill and one dispense for each side
  • Two leak detect sensor connections 1/4-in NPT (one for each side)
  • Two fluid connections configurable to various tube connections (one inlet and one outlet)
  • Two analog hall effect stroke sensing
Controller Connections
Digital Outputs
  • Four solenoid signals
  • Two stroke rate signals (for tool feedback)
  • Pump running signal (for tool feedback)
  • Alarm output (for tool feedback)
Digital Inputs
  • Remote signal left
  • Remote signal right
  • Enable scaled output signal
  • Retrain pump sensors
  • Leak detect input
  • Reset Alarms
Analog Inputs
Two stroke sensors

*可能根據不同配置。吸升高度會隨著時間的推移而減少。推薦的安裝水準高於液態源1米以上。 連絡人 White Knight 獲得更多資訊。

泵配置

獲取報價單請求樣品本地經銷商