개요
White Knight offers various liquid inlet and outlet fitting options, including Flaretek®, Tubing Out, Weldable, Pillar® 300 Super, 암컷 NPT (FNPT) and Synchro-Flare™ in sizes ranging from 1/4-inch to 1-1/4-inch.
*피팅은 모든 크기에서 사용할 수 없습니다.
Flaretek® Compatible
치수: 1/4, 3/8, 1/2, 3/4, 1, and 1-1/4 in.
Purebond® Weldable
치수: 1/2, 3/4, and 1 in.
Pillar® Super 300
치수: 1/2, 3/4, 1, and 1-1/4 in.
Sychro-Flare™
치수: 3/8, 1/2, 3/4, and 1 in.
Female NPT (FNPT)
치수: 1/4, 3/8, 1/2, 3/4, 1, and 1-1/4
Tubing Out
치수: 1/4, 3/8, 1/2, 3/4, 1, and 1-1/4 in.
펌프 호환성
| 펌프 모델 | 1/4 in (0.25) |
3/8 in (0.375) |
1/2 in (0.5) |
3/4 in (0.75) |
1 in (1.0) |
1-1/4 in (1.25) |
|---|---|---|---|---|---|---|
*피팅은 모든 크기에서 사용할 수 없습니다.
| 과거 모델 펌프 | 1/4 in (0.25) |
3/8 in (0.375) |
1/2 in (0.5) |
3/4 in (0.75) |
1 in (1.0) |
1-1/4 in (1.25) |
|---|---|---|---|---|---|---|
| AT50 | ||||||
| AP40EXT3 | ||||||
| AP50 | ||||||
| AP50FM | ||||||
| X50 | ||||||
| PL30 | ||||||
| PX30 | ||||||
| PLF30 | ||||||
| 과거 모델 펌프 | 1/4 in. (0.25) |
3/8 in. (0.375) |
1/2 in. (0.5) |
3/4 in. (0.75) |
1 in. (1.0) |
1-1/4 in. (1.25) |
| AT100 | ||||||
| AP100 | ||||||
| AP100FM | ||||||
| X100 | ||||||
| PL60 | ||||||
| PX60 | ||||||
| PLF60 | ||||||
| 과거 모델 펌프 | 1/4 in. (0.25) |
3/8 in. (0.375) |
1/2 in. (0.5) |
3/4 in. (0.75) |
1 in. (1.0) |
1-1/4 in. (1.25) |
| AT300HD | ||||||
| AP200 | ||||||
| AP300 | ||||||
| AP200FM | ||||||
| AP300FM | ||||||
| PL120 | ||||||
| PX120 | ||||||
| PLF120 | ||||||
| 과거 모델 펌프 | 1/4 in (0.25) |
3/8 in (0.375) |
1/2 in (0.5) |
3/4 in (0.75) |
1 in (1.0) |
1-1/4 in (1.25) |
*피팅은 모든 크기에서 사용할 수 없습니다.
맥동 감쇄기 호환성
iPolymer 피팅
iPolymer offers an extensive line of PTFE fittings, including Flare, Compression, NPT, Flange, Barbed and more. All of our fittings are machined from 100% virgin PTFE. iPolymer’s PTFE Flare fittings feature Fit-Line Global™ PVDF Flare Nuts that can be used with Fit-Line’s TruFASTEN™ torque wrenches. In addition to our standard fitting line, iPolymer can custom manufacture fittings to your exact sizing and configuration requirements with an exceptionally quick turn-around time.
iPolymer 다양한 연결 선택 사양
Materials of Construction
- Fittings and Ferrules are machined virgin PTFE
- Two-piece Ferrule-Gripper assemblies are PVDF
- “HA” style Nuts are molded PVDF
Pressure Ratings
- Temperatures at or below 22ºC (72ºF): 120 psi for 1/16” fittings linear decreasing to 80 psi for 3/4” fittings and 60 psi for fittings larger than 3/4”<//li>
- Temperatures elevated from 22ºC (72ºF) to 85ºC (185ºF): 90 psi for 1/16” fittings linear decreasing to 60 psi for 3/4” fittings and 40 psi for fittings larger than 3/4”
- Contact factory for temperature ratings above 85ºC / 185ºF
Pressure performance ratings are based on laboratory testing, industry standard material characteristics, and historical data. A combination of extreme temperature and pressure may affect these products. The user is responsible for verifying the suitability of these products for their application.
Ferrule & Gripper Style
- Cut tubing to desired length
- Loosen nut and insert tube
- Tighten nut finger tight
- Fitting is ready for use
Flared End Style
