PPM100气动计量泵提供高压能力和PTFE液体回路。 准确地供液最高每次100毫升和活动的膜片千军万适用出口高压。 两个可以精确控制的止回阀。 SE configuration include magnets and additional connection points to accommodate stroke detection.
PPM100 规格表PPM100 用户手册
PPM100 分解图PPM100 CAD模型
特点和优点
- 手动控制行程限位器可调节分配流量达到100ml
- 完全可调的行程速度
- 高精度泵具有高达±0.1%重复性
- 安全、无泄漏操作，不需要维护
- 无暴露的金属防止腐蚀和污染
- 为高纯应用的全聚四氟乙烯材质的液体管路
- PP外壳的PTFE材质的旋转膜片
- 易于安装和检查
- 嵌入或外挂的组件易于安装和维护
- 安装在任意方向
- 100级洁净室装配、测试和封装
- 自吸式
- 占用空间小
- 最小的保持量
- 允许60-85psi 压力
- 正面的进/出口阀可防止气体通过
- 泄漏检测可行的
操作
规范
| Dispense Range | 10 - 100 ml per stroke |
| Dispense Repeatability | ± 0.1% (Full Scale) |
| Cycles Per Minute | up to 12 CPM |
| Air Consumption SCF per Cycle |
0.038-0.048 SCFM |
| Fluid Path Materials | PTFE |
| Valve Actuation Air Pressure |
4.14 - 5.86 Bar (60 - 85 PSI) |
| Max Discharge Pressure | 5.86 Bar (85 PSI) |
| Temperature Capability | up to 100°C (212°F) |
| Weight | 1.6 KG 3.5 LBS |
| Suction Lift* | 4.6 Meter 15 Feet |
| Leak Detection Options | Valve Position Sensing |
*Optimized parameters improve repeatability. To maximize repeatability, minimize suction lift, optimize dispense nozzle setup, purge air from fluid chamber, and minimize inlet fluid pressure fluctuations. Tests conducted with water at ambient temperature. Dispense range measured at full stroke with maximum and minimum supply pressures at 80 and 60 PSI.