泵概述
单击并拖动以旋转
PSH系列泵是高纯度的再循环和供液的理想解决方案，供液温度高达145°C。 PTFE和PFA泵完全无金属，White Knight 换向阀无需锁定和手动复位。 可以安全可靠的在两年的保修期内运行。 最高允许工作压力5.5公斤(80 psi)，最高可以在145度无需冷却水的热循环中使用。 该泵泵均有三种型号 PSH015、PSH030、PSH060 和 PSH140、最大流量为15、30、60和140升/每分钟。
泵特点和优点
- 非金属的设计消除了潜在的污染
- 过程安全的PTFE和PFA液体通路
- 防漏的机加工设计
- 具有加强型螺纹的聚四氟乙烯材质的泵头
- 无橡胶O形圈、不漏水、无需紧固
- 变速机构中无润滑剂
- 无电机、无发热
- 气动可最大程度地减少液体的脉动和泵的振动
- 各种液体连接选项的
- 安全、无泄漏操作由于无金属设计
- 陶瓷中空气梭阀
- 最少的零件耐用的设计
- 100级洁净室装配、测试和封装
- 易于安装和维护
- 在两年的保修期内不会有任何预防性维护
- 强大的波纹管的设计能使压力达到5.5Bar(80psi)
- 蒙打能力是可行的
泵操作
空气供应
排气
周围环境的空气
液体抽吸
液体排放
泵性能和尺寸
PSH140 泵性能曲线
*Graph is for reference only. Performance was measured utilizing 1/2 in (3/8 in ID) air line and 1-1/4 in (1-1/8 in ID) liquid lines with 1 ft flooded suction. Performance may vary in your system.
PSH060 泵性能曲线
*Graph is for reference only. Performance was measured utilizing 1/2 in (3/8 in ID) air line and 1-1/4 in (1-1/8 in ID) liquid lines with 1 ft flooded suction. Performance may vary in your system.
PSHSD060 泵性能曲线
*Graph is for reference only. Performance was measured utilizing 1/2 in (3/8 in ID) air line and 1-1/4 in (1-1/8 in ID) liquid lines with 1 ft flooded suction. Performance may vary in your system.
PSH030 泵性能曲线
*Graph is for reference only. Performance was measured utilizing 1/2 in (3/8 in ID) air line and 1-1/4 in (1-1/8 in ID) liquid lines with 1 ft flooded suction. Performance may vary in your system.
PSHSD030 泵性能曲线
*Graph is for reference only. Performance was measured utilizing 1/2 in (3/8 in ID) air line and 1-1/4 in (1-1/8 in ID) liquid lines with 1 ft flooded suction. Performance may vary in your system.
PSH015 泵性能曲线
*Graph is for reference only. Performance was measured utilizing 1/2 in (3/8 in ID) air line and 1-1/4 in (1-1/8 in ID) liquid lines with 1 ft flooded suction. Performance may vary in your system.
PSHSD015 泵性能曲线
*Graph is for reference only. Performance was measured utilizing 1/2 in (3/8 in ID) air line and 1-1/4 in (1-1/8 in ID) liquid lines with 1 ft flooded suction. Performance may vary in your system.
泵规范
Model | PSH015 | PSH030 | PSH060 | PSH140 |
|---|---|---|---|---|
| Max Flow Rate* | 13.4 lpm 3.54 gpm | 22.8 lpm 6.02 gpm | 58.3 lpm 15.40 gpm | 118 lpm 31.3 gpm |
| Size of Air Connection | 1/4-in FNPT | 1/4-in FNPT | 1/4-in FNPT | 3/8-in FNPT |
| Displacement Per Cycle* | 0.074 liters 0.019 gal | 0.074 liters 0.019 gal | 0.178 liters 0.047 gal | 0.500 liters 0.132 gal |
| Cycles Per Minute* | 216 max | 333 max | 348 max | 254 max |
| Weight | 4.6 kg (10.1 lb) | 4.6 kg (10.1 lb) | 7.3 kg (16.1 lb) | 18.5 kg (40.9 lb) |
| Suction Lift* | 1 m (3 ft) | 1 m (3 ft) | 1 m (3 ft) | 1 m (3 ft) |
| Sound Pressure** | 74.00 dB(a) 79.90 dB(a) | 74.00 dB(a) 79.90 dB(a) | 73.11 dB(a) 82.50 dB(a) | 71.73 dB(a) 75.42 dB(a) |
| Sound Power** | 63.01 dB(a) 69.90 dB(a) | 63.01 dB(a) 69.90 dB(a) | 64.29 dB(a) 74.11 dB(a) | 70.46 dB(a) 75.27 dB(a) |
| Max Temperature | 145°C (293°F) | |||
| Max Pressure | 5.5 Bar (80 psi) | |||
| Fluid Path Materials | PTFE / PFA | |||
| Non-Fluid Path Materials | PTFE / PFA / ceramic | |||
| Stroke Detection Options | Fiber optic with or without sensor, or solid state pressure switch | |||
| Leak Detection Options | Fiber optic with or without sensor, or conductivity | |||
| Electronic Control | Available | |||
Model | PSH015 | PSH030 | PSH060 | PSH140 |
*May vary by configuration or system. Suction lift diminishes over time. Recommended installation level less than 3 ft above source.
**dB Level at 80 psi 50 CPM (top) and 80 psi maximum CPM (bottom). Sound Levels measured in accordance with ISO9614-2:1997.
***Dry-run capable PSHSD pumps require flooded suction and may have a reduced warranty. Contact White Knight for details.
