White Knight Fluid Handling

半导体,太阳能,发光二极管(LED),平板显示器,电子解决方案

特色产品

Heateflex Aquarius-ECO 去离子(DI)热水器系统

Aquarius-ECO™去离子热水器系统

Conserve ultrapure water and energy by recirculating heated water until it is needed in the process. Increasing needs to conserve water and energy have world’s largest OEMs and Fabs to…

Aquarius-ECO去离子(DI)热水器系统

White Knight 产品

泵、阀、闭环系统、压力容器、设备及配件。

White Knight 气体驱动的双风囊泵

气体驱动的双风囊泵

有PTFE和PFA液体通道的高纯气动风囊泵。 可靠、无泄漏泵提供高流率、稳定的压力和稳定的温度。 不含金属、橡胶O型圈、叶轮或电动机。 可以将管路内的液体打空并且提供较高的吸液高度。

气体驱动的双风囊泵
White Knight 利用磁悬浮叶轮实现平稳连续流动的离心泵

离心泵利用磁悬浮叶轮

离心泵特点是具有单独的磁悬浮叶轮,没有滑动旋转。该泵能够提供连续、稳定的、 无脉动流量。而采用PTFE和PFA材质的对工艺安全的液体通路是超纯湿工艺应用的理想选择。该泵是通过电气控制叶轮的速度来实现精确控制的。

离心泵利用磁悬浮叶轮
White Knight 高压气体驱动的双膜片泵

气体驱动的双膜片泵

气体驱动的双膜片泵之所有具有防酸的特性是其由特氟龙或聚乙烯材质制作的。非常适合用于腐蚀性的或有毒的液体如酸、燃油、胶水、油漆、油墨、或废水处理。

气体驱动的双膜片泵
White Knight Metering Pumps for Chemical Dispense

计量泵

高纯度的气动计量泵和电子控制计量泵准确分配至100ml和50ml。 使用PTFE活动的膜片、较高的出口压力可以安全可靠的输送化学品。

计量泵
White Knight High-Purity Back-Pressure Regulators

调压阀

精确控制循环回路的压力或不需要额外的电路或反馈的多个分配点。全PTFE和PFA液的路径。最高在100°C和7公斤。可以精确的减少系统中的脉冲。

调压阀
CBA气液分离器去除化学药剂供应过程中的气泡

气液分离器

的气液分离器可减少化学药剂输送以及晶片加工系统中的气泡。它们具有4英寸的内径,在气液分离过程中提供更大的表面积。它们可用于各种可连接的管道长度。

气液分离器
White Knight PPMC 微型泵

微型泵

微型泵能够达到300 ml/min的流速和160磅排放压力。 液体路径全PTFE和PFA结构,可以任意位置安装。 电磁阀启动每个吸入和排出。

微型泵
White Knight Non-Metalic High-Purity Filter Housings

过滤器外壳

通用、紧凑、多腔滤波器外壳带有PTFE和PFA液体路径适用于高纯度的化学品。 双连和四连过滤器外壳有平行或在线型号。

过滤器外壳
iPolymer PTFE Valves

流体阀

iPolymer manufactures a variety of high-purity valves with PTFE, PVDF, or Polypro wetted paths, including Solenoid Valves, Pneumatic Valves, Manual Valves, Suck Back Valves, and Pressure Relief Valves.

特氟龙流体阀
iPolymer PTFE Spray Guns

特氟龙喷枪

iPolymer manufactures PTFE spray guns for DI Rinsing, Nitrogen Drying, Recirculating, and Liquid Dispensing. They are made of virgin PTFE and Polypropylene for long life in harsh acidic or corrosive environments.

特氟龙喷枪
ipolymer Air Cylinders

塑料气缸

iPolymer Air Cylinders made from strong, durable PVC, Polypropylene, and PVDF. They have standard, easy-to-use mounting and optional position sensors.

塑料气缸
iPolymer PTFE Air & Liquid Aspirators

特氟龙吸气器

iPolymer PTFE air and liquid aspirators offer efficient, rapid siphoning of gasses, water, and chemicals. They use clean dry air (CDA) or Nitrogen to initiate and sustain a natural or forced siphon.

特氟龙吸气器
White Knight 利用磁悬浮叶轮实现平稳连续流动的离心泵

高纯离心泵

利用磁悬浮叶轮实现平稳连续流动的离心泵

离心泵特点是具有单独的磁悬浮叶轮,没有滑动旋转。 该泵能够提供连续、稳定的、 无脉动流量。 而采用PTFE和PFA材质的对工艺安全的液体通路是超纯湿工艺应用的理想选择。

  • 磁悬浮驱动式叶轮
  • 电机驱动叶轮在不接触外壳的条件下旋转
  • 采用PTFE和PFA材质的对工艺安全的液体通路
  • 无漏液的Toung-&-Groove密封
  • 最高流量140升每分钟
  • 输出压力 ≤ 150 psi
  • 压差 ≤ 69 psi
  • 低颗粒产生和低剪切特性
高纯离心泵

湿式工艺罐

Global Standard for Static and Recirculating Processes

Accubath Heated Quartz Process Tank Silicon Nitride Etch

Accubath™ 加热的石英湿式工艺罐

Accubath™ 加热的石英湿式工艺罐 processes for quartz-compatible chemistries up to 190°C…

加热的石英湿式工艺罐
Accumeg PVDF Megasonic Tank with Quick Dump Rinse

Accubath™ PTFE, PVDF, PFA, NPP 湿式工艺罐

Accubath™ PTFE, PVDF, PFA, NPP 湿式工艺罐 minimize welding and seams to reduce particles…

高纯湿式工艺罐
Accubath XE-Lab System Wet Etch Bath

Accubath™ 高温蓝宝石湿蚀刻处理罐

Accubath™ 高温蓝宝石湿蚀刻处理罐 safely and reliably heat chemistries up to 300°C…

高温蓝宝石湿蚀刻处理罐
Accumeg Megasonic Cleaning Tank Systems PVDF Quick Dump
Accumeg Megasonic Cleaning Tank Systems Quartz Recirculating

PVDF, PFA, 或石英 Megasonic 系统

Accumeg™ Megasonic 兆声清洗槽

Gapless Transducer offers better process uniformity in the tank

Transducers with tightly matched crystals wired together in parallel for small potential difference between crystals

  • 可靠的部件
  • 广泛36个月保修
  • 盒式&盒式更少设计长达300mm晶圆 & larger substrates
  • 高功率密度
  • 运行在70℃+
  • Replaceable transducer arrays
Accumeg™ Megasonic 兆声清洗槽

White Knight 加热器

超纯加热解决方案

Accuheat PFA直列式流体加热器

Accuheat™ PFA直列式流体加热器

Accuheat™ PFA直列式流体加热器 are ideal for heating hydrofluoric acid (HF), potassium hydroxide (KOH),…

Accuheat™ PFA直列式流体加热器
Accuheat Quartz直列式流体加热器 Dual Tube 12000 Watts

Accuheat™ Quartz直列式流体加热器

Accuheat™ quartz直列式流体加热器 consist of ultra-pure quartz tubes, wrapped in a heater element that provides…

Accuheat™ Quartz直列式流体加热器
Accuheat PFA直列式溶剂加热器

Accuheat™ PFA直列式溶剂加热器

Accuheat™ PFA直列式溶剂加热器 are ideal for Isopropyl alcohol, Acetone, Ethanol, Toluene, EKC, MEK, NMP,…

Accuheat™ PFA直列式溶剂加热器
Accuheat Quartz直列式溶Gas加热器

Accuheat™ Quartz直列式溶Gas加热器

Accuheat™ 直列式溶gas加热器 for Nitrogen (N2), Ammonia (NH3), Helium (He), Argon (Ar), BCl3, HCl, CO, CO2,…

Accuheat™ Quartz直列式溶Gas加热器
Heateflex Aquarius 去离子水加热器系统

Aquarius® 去离子(DI)热水器系统

Aquarius® 去离子热水器系统 are the perfect solution for high-purity heating applications that…

Aquarius® 加热器
Heateflex PVDF PFA 超纯内联流体加热器

PFA超纯内联流体加热器

HC Series in-line heaters feature PFA flow paths for optimal compatibility with aggressive acids and chemicals…

PFA加热器
Heateflex LH1 PVDF/PFA 超纯内联流体加热器

PVDF/PFA超纯内联流体加热器

PVDF/PFA fluid heaters ideal for heating deionized water, acids, and less aggressive process chemistries…

PVDF/PFA加热器
Heateflex Vesper PVDF PFA 换热器

Vesper™ PVDF PFA 热交换器

Vesper™ Series of PVDF/PFA 热交换器 offer various solutions for heating, cooling, and temperature trimming for…

Vesper™ 热交换器
Heateflex PFA 浸入式水箱加热器

PFA 浸入式水箱加热器

Heateflex 浸入式水箱加热器 are great for heating fluid baths to a constant temperature. These tank heaters are…

PFA浸入式水箱加热器
Heateflex流体和气体加热系统

流体和气体加热系统

White Knight ultra-pure fluid heaters and heating systems, industrial water heaters, and immersion heaters for deionized water, chemicals, gases, and solvents.

流体和气体加热系统
White Knight Heateflex Imtec 旧型号的加热器

旧型号的加热器

Discontinued heaters systems include: Aries Solvent Heaters, Fluidix® Steam-Powered DIW Heaters, Poseidon™ Stainless Steel Heaters, SX Stainless Steel Heaters, Demeter™ Systems…

旧型号的加热器
Heateflex Aquarius 去离子水加热器系统

Aquarius® 去离子水加热器系统

Aquarius® 去离子水加热器系统 are the perfect solution for high-purity DI Water heating applications that require highly accurate temperature control. Its Power-to-Flow Control® feature provides one of the most accurate temperature controls available in DI water heating systems, and it eliminates undesirable overshoots or drops in temperature due to inadequate PID controllers. Aquarius® systems are engineered to deliver high flows of continuous, at-temperature, hot DI water.

  • Ultra-pure design with PVDF/PFA wetted surfaces
  • Programmable logic controller delivers enhanced temperature stability
  • No N2 purge required
  • Plug-and-play system with fully integrated controls
  • High-resolution touch-screen
  • Save costs by reducing the need for multiple immersion heaters
Aquarius® 去离子水加热器系统