PPM100氣動計量泵提供高壓能力和PTFE液體回路。 準確地供液高達每次100毫升,和操作完全支持滾動隔膜-最大排氣壓力的能力。 兩個可以精確控制的逆止閥。 SE configuration include magnets and additional connection points to accommodate stroke detection.
PPM100規格表PPM100用戶手冊
PPM100分解圖PPM100 CAD模型
特點和優點
- 手動控制行程限位器可調節分配流量達到100ml
- 可調式的行程速度
- 精確度為正負0.1%
- 安全、無洩漏操作，不需要維護
- 無暴露的金屬防止腐蝕和污染
- 100% 為高純度應用的全聚四氟乙烯材質的液體管路
- PP外殼的PTFE材質的旋轉膜片
- 易於安裝和檢查
- 嵌入或外掛的組件易於安裝和維護
- 安裝在任意方向
- 潔淨室內組裝，測試及包裝
- 自吸式
- 佔用空間小
- 最小的保持量
- 允許60-85 psi
- 正面的進/出口閥可防止氣體通過
- 洩漏檢測口
操作
規範
| Dispense Range | 10 - 100 ml per stroke |
| Dispense Repeatability | ± 0.1% (Full Scale) |
| Cycles Per Minute | up to 12 CPM |
| Air Consumption SCF per Cycle |
0.038-0.048 SCFM |
| Fluid Path Materials | PTFE |
| Valve Actuation Air Pressure |
4.14 - 5.86 Bar (60 - 85 PSI) |
| Max Discharge Pressure | 5.86 Bar (85 PSI) |
| Temperature Capability | up to 100°C (212°F) |
| Weight | 1.6 KG 3.5 LBS |
| Suction Lift* | 4.6 Meter 15 Feet |
| Leak Detection Options | Valve Position Sensing |
*Optimized parameters improve repeatability. To maximize repeatability, minimize suction lift, optimize dispense nozzle setup, purge air from fluid chamber, and minimize inlet fluid pressure fluctuations. Tests conducted with water at ambient temperature. Dispense range measured at full stroke with maximum and minimum supply pressures at 80 and 60 PSI.