White Knight PFA系列泵

高純度泵有輸送100°C液體的能力以光纖控制

PFA系列用於半導體製造的氣驅雙風泵
PFA系列泵 規格表

用戶手冊

PFA015 用戶手冊PFA030 用戶手冊PFA060 用戶手冊PFA140 用戶手冊

分解圖

PFA015 分解圖PFA030 分解圖PFA060 分解圖PFA140 分解圖

翻新的零備件

PFA015 翻新的零備件PFA030 翻新的零備件PFA060 翻新的零備件PFA140 翻新的零備件

CAD模型

PFA015 CAD模型PFA030 CAD模型PFA060 CAD模型PFA140 CAD模型

泵訂購說明

PFA015 訂購說明PFA030 訂購說明PFA060 訂購說明PFA140 訂購說明
獲取報價單本地經銷商

概述

按一下並拖動以旋轉

PFA系列泵是理想的解決方案為環境溫度和高純度的再循環或交付的應用中,光纖傳感器是最佳的系統控制要求。 PTFE和PFA泵完全無金屬,使用光纖傳感器和外部電磁閥控制。 可以安全可靠的在兩年的保修期內運行。 最高允許工作壓力7公斤(100 psi),最高可以在100°C度使用。 該泵泵均有三種型號 PFA030, PFA060, PFA140, 最大流量為30、60 和 140升/每分鐘。

特點和優點

  • 不含金屬、無腐蝕,消除了潛在的污染
  • 過程安全的PTFE和PFA液體通路
  • 由Tongue-and-Groove密封的防漏的機加工設計
  • 變速機構中無潤滑劑
  • 無電機、無發熱
  • 各種液體連接選項的
  • 安全、無洩漏操作由於無金屬設計
  • 聚丙烯泵頭
  • 最少的零件耐用的設計
  • 100級潔淨室裝配、測試和封裝
  • 易於安裝和維護
  • 強大的波紋管的設計能使壓力達到7公斤(100 psi)
  • 在兩年的保修期內不會有任何預防性維護
White Knight 高純度度的
7 公斤(100 psi) 氣壓
最高100°C度
White Knight 泵通過光纖傳感器進行控制
White Knight 兩年期的保固
CE認證

泵操作

PFA 系列泵採用電磁閥和光纖傳感器控制可快速有效地提高耐久性。

空氣供應

排氣

周圍環境的空氣

切換信號

液體抽吸

液體排放

性能曲線 和 尺寸圖

PFA015 性能曲線

*Graph is for reference only. Performance was measured utilizing 1/2 in (3/8 in ID) air line and 1-1/4 in (1-1/8 in ID) liquid lines with 1 ft flooded suction. Performance may vary in your system.

PFA015 尺寸圖

尺寸單位為英寸的圖(毫米)

下載 PFA015 尺寸圖(PDF)

PFA030 性能曲線

*Graph is for reference only. Performance was measured utilizing 1/2 in (3/8 in ID) air line and 1-1/4 in (1-1/8 in ID) liquid lines with 1 ft flooded suction. Performance may vary in your system.

PFA030 尺寸圖

尺寸單位為英寸的圖(毫米)

下載 PFA030 尺寸圖(PDF)

PFASD030 性能曲線

*Graph is for reference only. Performance was measured utilizing 1/2 in (3/8 in ID) air line and 1-1/4 in (1-1/8 in ID) liquid lines with 1 ft flooded suction. Performance may vary in your system.

PFA030 尺寸圖

尺寸單位為英寸的圖(毫米)

下載 PFA030 尺寸圖(PDF)

PFA060 性能曲線

*Graph is for reference only. Performance was measured utilizing 1/2 in (3/8 in ID) air line and 1-1/4 in (1-1/8 in ID) liquid lines with 1 ft flooded suction. Performance may vary in your system.

PFA060 尺寸圖

尺寸單位為英寸的圖(毫米)

下載 PFA060 尺寸圖(PDF)

PFASD060 性能曲線

*Graph is for reference only. Performance was measured utilizing 1/2 in (3/8 in ID) air line and 1-1/4 in (1-1/8 in ID) liquid lines with 1 ft flooded suction. Performance may vary in your system.

PFA060 尺寸圖

尺寸單位為英寸的圖(毫米)

下載 PFA060 尺寸圖(PDF)

PFA140 性能曲線

*Graph is for reference only. Performance was measured utilizing 1/2 in (3/8 in ID) air line and 1-1/4 in (1-1/8 in ID) liquid lines with 1 ft flooded suction. Performance may vary in your system.

PFA140 尺寸圖

尺寸單位為英寸的圖(毫米)

下載 PFA140 尺寸圖(PDF)

規範

Model
PFA015
PFA030
PFA060
PFA140
Flow Rate*
12.8 lpm
3.38 gpm
25.7 lpm
6.79 gpm
66.1 lpm
17.46 gpm
146.7 lpm
38.75 gpm
Size of Air Connection
1/4-in FNPT
1/4-in FNPT
1/4-in FNPT
3/8-in FNPT
Displacement Per Cycle*
0.089 liters
0.024 gal.
0.089 liters
0.024 gal.
0.216 liters
0.057 gal.
0.500 liters
0.132 gal.
Cycles Per Minute*
≤ 190
≤ 336
≤ 318
≤ 233
Weight
2.4 kg (5.3 lb)
2.4 kg (5.3 lb)
4.7 kg (10.4 lb)
15.6 kg (34.4 lb)
Suction Lift*
3 m (10 ft)
3 m (10 ft)
3 m (10 ft)
3 m (10 ft)
Sound Pressure**
69.54 dB(a)
66.58 dB(a)
69.54 dB(a)
66.58 dB(a)
82.74 dB(a)
82.61 dB(a)
81.98 dB(a)
91.60 dB(a)
Sound Power**
58.44 dB(a)
65.52 dB(a)
58.44 dB(a)
65.52 dB(a)
71.92 dB(a)
73.84 dB(a)
76.37 dB(a)
83.16 dB(a)
Max Temperature
100°C (212°F)
Max Pressure
7 Bar (100 psi)
Fluid Path Materials
PTFE / PFA
Non-Fluid Path Materials
PTFE / PFA / PP
Stroke Detection Options
Fiber optic with or without sensor, or solid state pressure switch
Leak Detection Options
Fiber optic with or without sensor, or conductivity
Electronic Control
Available
Model
PFA015
PFA030
PFA060
PFA140

*May vary by configuration or system. Suction lift diminishes over time. Recommended installation level less than 3 ft above source.
**dB Level at 100 psi 50 CPM (top) and 100 psi maximum CPM (bottom). Sound Levels measured in accordance with ISO9614-2:1997.
***Dry-run capable PFASD pumps require flooded suction and may have a reduced warranty. Contact White Knight for details.

配置

獲取報價單訂購試用泵本地經銷商
White Knight 高純度閉迴路系統

高純度閉迴路系統

自動保持層流或穩定的壓力與金屬的閉迴路控制系統提供穩定的溫度、死的頭和吸入器的提升。

控制您的高純度化學品製程和供應系統。 簡化流程自動化,以節省時間,資源和降低成本。

  • 最高流量140升每分鐘
  • 最高7公斤(100PSI)壓力
  • 最高210°C度
  • 保持穩定的溫度
  • 不含金屬、無腐蝕,消除了潛在的污染
  • 無橡膠O形圈、不漏水、無需緊固
  • 無電機、無發熱
  • 無葉輪、無微泡
高純度閉迴路系統