White Knight 液氣分離器

在化學品輸送過程中去除氣泡

概述

CBA系列的液氣分離器可減少高純度化學品輸送和晶圓加工後所產生的氣泡. 它們具有4英寸內徑,可提供更大的表面積來去除氣泡. 它們可以有各種可連接的管路長度. 它們具有可配置的端口連接和專利的 tongue-and-groove 密封設計.

CBA液氣分離器在化學品輸送過程中去除氣泡
CBA 系列 規格表

泵訂購說明

獲取報價單本地經銷商
White Knight 兩年期的保固
White Knight 高純度度的
7 公斤(100 psi) 氣壓
最高100°C度

特點和優點

  • 過程安全的PTFE和PFA液體通路
  • 最高7公斤(100 psi)壓力
  • 最高100°C度
  • 去除輸送化學品及晶圓加工後的氣泡
  • Tongue和Groove 密封技術是最可靠和可重複使用的
  • 壓製的PFA管道以螺紋銜接無需焊接即可輕鬆進行設置和維護
  • 壓力能為更快的製程提供高流量
  • 達6升的型號
Debubbler Operation Diagram with Sensors

操作

CBA系列液氣分離器向上重新引導流體並減慢流體的速度,使氣泡在腔室內上升. 當空氣聚集在頂部時,液位下降,直到下部傳感器監測到低液位並且發送閥門打開的訊號以通過排放口釋放空氣. 作為通風口,液位上升,直到上部傳感器監測到高液位並發送閥門關閉的訊號.

Debubbler Applications

Remove Bubbles After Pumps

Chemical enters the debubbler through the stand tube. Level sensors 1 and 2 control the collected air volume in the debubbler. Collected air exits through the vent line.

Debubbler Removing Bubbles After Pump
Debubbler Removing Bubbles After Pump

Remove Bubbles Before Pumps

Chemical is pulled into the debubbler through the stand tube. Level sensors 1 and 2 control air collection level to purge the collected air, a vacuum is required to remove collected air. This can be achieved using a venturi-type vacuum.

Debubbler Removing Bubbles Before Pump
Debubbler Removing Bubbles Before Pump

Automate Drum Change

Level sensors 1 and 2 act to keep bubbles from the drums from continuing through to the pump. Level 3 indicates an empty drum. This can be used as an automatic drum switch or as a drum empty signal.

Debubbler Automated Drum Change with Empty Signal
Debubbler Automated Drum Change with Empty Signal

尺寸圖

尺寸單位為英寸的圖(毫米)

mm (in)AB
1 liter295 (11.6)132 (5.2)
2 liter434 (17.1)272 (10.7)
3 liter572 (22.5)409 (16.1)
4 liter798 (31.4)632 (24.9)
5 liter935 (36.8)772 (30.4)
6 liter1074 (42.3)980 (38.6)

配置

獲取報價單本地經銷商