맥동 없이 잔잔한 흐름의 펌프

첨단의 케미칼 공정을 위한 고 순도 층류 펌프

LHA030 펌프는 2021년 7월 7일 단종. PSA060 펌프로 개선하십시요. LHA030 프는 단종 후 3년간 지원.

LHA 시리즈 사양설명서

분해도

LHA030 분해도

주문 지침

LHA030 주문 지침
견적 요청대리점 위치 및 연락처

개요

LHA 시리즈 층류 펌프는 30 lpm 까지 일정한 유량을 제공하고 공정에 안전한 PTFE 및 PFA 유체 경로. 유체 온도 100°C (212°F) , 5.5 Bar ( 80 psi ) 공압 및 흡입 양정 3 m.

기능 및 이점

  • 30 lpm 까지 층류 이송
  • 공정에 안전한 PTFE 및 PFA 로 구성된 유체경로
  • 엘라스토머 O-링 없는 ; 재 조임이 필요없는
  • 누수없는 Seal 로 신뢰할수 있는 작동
  • 아날로그 신호의 행정 감지
  • 광 섬유나 전도도 누수 감지
  • 최소화의 마모와 연장된 수명을 제공하는 Copolymer 로 된Check Cage
  • 다양한 약액 연결 선택 사양
  • 검증된 튼튼한 벨로우즈 기술
  • ≤ 5.5 Bar (80psi) 압력
  • Dead-Head 능력의 작동
  • 흡입 양정은 3 m 까지
  • 내구 설계로 최소한의 부품
  • 내구성 있는 설계 가공
  • 쉬운 설치 와 서비스
  • Class 100 크린룸에서 조립, 테스트 및 포장
  • 2년 보증기간 동안 유지 보수 불필요
White Knight 2 년 품질 보증
CE 인증
화학 약품 이송 및 순환 용 압력 5.5 Bar (80 psi) 테플론 펌프
White Knight 최대 100C까지 작동 가능한 반도체 펌프

펌프 성능

*Graph is for reference only. Performance was measured utilizing 1/2 in (3/8 in ID) air line and 1-1/4 in (1-1/8 in ID) liquid lines with 1 ft flooded suction. Performance may vary in your system.

펌프 치수

LHA030 치수 내려 받기

펌프 사양서

Model
LHA030
Flow Rate*
≤ 31 lpm (8.2 gpm)
Air Connection
1/4" FNPT
Fluid Temperature
≤ 100°C (212°F)
Supply Air Pressure
≤ 5.5 bar (80 psi)
Startup Air Pressure
≥ 1.4 bar (20 psi)
Required Air Volume
≥ 26 SCFM
Suction Lift*
3 m (10 ft)
Fluid Path Materials
PTFE, PFA
Non-Fluid Path Materials
PTFE, PFA, PP, Viton, Neodymium, PET-P, UHMW
Stroke Detection Options
Hall Effect Sensor (NPN or PNP)
Leak Detection Options
Fiber optic with or without sensor, or conductivity
Electronic Control
Call for details
Air Requirements
Air SignalsTwo 5-way valves (center vent) or Four 3-way valves (normally closed)
Valves with metal seals are recommended for longer life
Electrical Requirements
24 VDC Power
Power consumption depends on current draw on external devices:
  • Controller power alone 4 watts
  • Max Digital Output current (500 mA sourcing or 24 mA sinking)
  • Max Analog Output current (10 mA total voltage output or 20 mA with 4-20 mA conversion board)
Pump Connections
  • Four air connections 1/4-in NPT with quick exhaust connectors (one fill and one dispense for each side
  • Two leak detect sensor connections 1/4-in NPT (one for each side)
  • Two fluid connections configurable to various tube connections (one inlet and one outlet)
  • Two analog hall effect stroke sensing
Controller Connections
Digital Outputs
  • Four solenoid signals
  • Two stroke rate signals (for tool feedback)
  • Pump running signal (for tool feedback)
  • Alarm output (for tool feedback)
Digital Inputs
  • Remote signal left
  • Remote signal right
  • Enable scaled output signal
  • Retrain pump sensors
  • Leak detect input
  • Reset Alarms
Analog Inputs
Two stroke sensors

*구성에 따라 다를 수 있습니다. 흡입 양정 는 시간이 지남에 따라 감소합니다. 원천으로 부터 1 m 이내의 설치 레벨을 추천함.

펌프 구성

견적 요청데모 제품 신청대리점 위치 및 연락처