Aries 溶剂加热器

Aries solvent heaters were discontinued Apr 2, 2021. They are replaced by  Imtec Accuheat Solvent Heaters. Aries heaters will be supported until Dec 31, 2026.

Heateflex Aries 溶剂加热器
Heateflex Aries 溶剂加热器

概述

Aries Solvent Heaters safely heat thermally-sensitive fluids such as Isopropyl Alcohol (IPA) and EKC photoresist remover. This heater is ideal for both single-pass and recirculating applications where process temperature, fluid cleanliness and safety are all critical. Furthermore, Aries is an ETL-Listed product, and is UL-823 certified as explosion-proof, dust-ignition proof, and dust-tight, suitable for use in hazardous locations where flammable gases and liquids are present. Several optional controller packages are also available for the Aries on customer request.

Effective & Safe Heating

The solvent heater incorporates design features for effective and safe heating to UL standards. For instance, the insulated housing is explosion-proof, dust ignition-proof, and dust tight. High-pot material epoxy embeds the lead wires, and the heater core comes in a sealed 304 stainless steel enclosure. Furthermore, the ground fault circuit integrator serves as a quick safety switch to prevent too much power into the heater. Finally, the independent fluid path permits the heater to heat flammable fluids.

Isolate Sensors

This heater features a 316L stainless steel coiled tube for wetted surfaces. A durable stainless steel fluid path that is independent of the heater element allows the Aries to effectively heat flammable fluids. Hermetically-sealed electrical and control connections, with thermocouples for process and over-temperature, ensure safe operation.

Cooling Flow Path

The design of the heater includes a cooling flow path, removing residual heat when the process is complete. This ensures that when fluid is not needed, process flow temperature is reduced; protecting both the heater and the operator.

目录

Aries Solvent Heaters Brochure

用户手册

Aries Solvent Heaters Manual

系统设置

Aries Solvent Heaters Drawing
Get QuoteHeateflex Distributors

泵概述

  • Fluid path separated from heaters allows heating flammable fluids (e.g. IPA, NMP)
  • High-purity heating with 100% 316L electropolished process wetted surfaces
  • Isolated sensors
  • Lead wires are embedded in hi-pot material epoxy
  • Increased isolation of lead wires and sensors from fumed environments
  • Heater core is housed in a sealed SS304 enclosure
  • Cooling flow path
  • Removes residual heat from the heater core once process is completed
  • Reduces temperature of process flow once heated fluid is not needed
  • Can also be used to heat two processes simultaneously
  • High pressure design capable of 0-3,000 psi
  • Insulated housing maintains cool surface temperature for safe operation
  • Tested to UL standards for use in hazardous locations
  • Explosion-proof, dust ignition-proof, and dust-tight
  • Ethernet read/write (other options available)
  • No N2 Purge Required

安全特性

  • Liquid Level Sensor
  • Thermal Cut Off
  • Ground Fault Circuit Interrupter
  • Pressure Relief Valves
  • Flow Sensor
  • Redundant Safety PLC
Heateflex Aries 溶剂加热器安装入口
Heateflex Aries 溶剂加热器连接

规范

Heater
Patented Heateflex® Coil
Wetted Surface
316L Electropolished Stainless Steel
Sizes
2.5 kW to 9.0 kW (Dependent on Customer Voltage)
Voltages
200 VAC to 480 VAC, 3-ph (Dependent on Wattage)
Temperature
203°F (95°C)
Temperature Accuracy
±0.1°C (Contingent on Customer’s Facilitation)
Flow
0.5 GPM (1.9 LPM) to 32 GPM (122 LPM)
Pressure
60 PSIG @ 95°C
Efficiency
>99%
MTBF
10.29 years
Communication
Ethernet Read/Write (Other options available)
Get QuoteHeateflex Distributors