Aries 溶剤暖房器

Aries solvent heaters were discontinued Apr 2, 2021. They are replaced by  Imtec Accuheat Solvent Heaters. Aries heaters will be supported until Dec 31, 2026.

Heateflex Aries 溶剤暖房器
Heateflex Aries 溶剤暖房器


Aries Solvent Heaters safely heat thermally-sensitive fluids such as Isopropyl Alcohol (IPA) and EKC photoresist remover. This heater is ideal for both single-pass and recirculating applications where process temperature, fluid cleanliness and safety are all critical. Furthermore, Aries is an ETL-Listed product, and is UL-823 certified as explosion-proof, dust-ignition proof, and dust-tight, suitable for use in hazardous locations where flammable gases and liquids are present. Several optional controller packages are also available for the Aries on customer request.

Effective & Safe Heating

The solvent heater incorporates design features for effective and safe heating to UL standards. For instance, the insulated housing is explosion-proof, dust ignition-proof, and dust tight. High-pot material epoxy embeds the lead wires, and the heater core comes in a sealed 304 stainless steel enclosure. Furthermore, the ground fault circuit integrator serves as a quick safety switch to prevent too much power into the heater. Finally, the independent fluid path permits the heater to heat flammable fluids.

Isolate Sensors

This heater features a 316L stainless steel coiled tube for wetted surfaces. A durable stainless steel fluid path that is independent of the heater element allows the Aries to effectively heat flammable fluids. Hermetically-sealed electrical and control connections, with thermocouples for process and over-temperature, ensure safe operation.

Cooling Flow Path

The design of the heater includes a cooling flow path, removing residual heat when the process is complete. This ensures that when fluid is not needed, process flow temperature is reduced; protecting both the heater and the operator.


Aries Solvent Heaters Brochure


Aries Solvent Heaters Manual


Aries Solvent Heaters Drawing
Get QuoteHeateflex Distributors


  • Fluid path separated from heaters allows heating flammable fluids (e.g. IPA, NMP)
  • High-purity heating with 100% 316L electropolished process wetted surfaces
  • Isolated sensors
  • Lead wires are embedded in hi-pot material epoxy
  • Increased isolation of lead wires and sensors from fumed environments
  • Heater core is housed in a sealed SS304 enclosure
  • Cooling flow path
  • Removes residual heat from the heater core once process is completed
  • Reduces temperature of process flow once heated fluid is not needed
  • Can also be used to heat two processes simultaneously
  • High pressure design capable of 0-3,000 psi
  • Insulated housing maintains cool surface temperature for safe operation
  • Tested to UL standards for use in hazardous locations
  • Explosion-proof, dust ignition-proof, and dust-tight
  • Ethernet read/write (other options available)
  • No N2 Purge Required


  • Liquid Level Sensor
  • Thermal Cut Off
  • Ground Fault Circuit Interrupter
  • Pressure Relief Valves
  • Flow Sensor
  • Redundant Safety PLC
Heateflex Aries 溶媒暖房器
Heateflex Aries 溶媒暖房器


Patented Heateflex® Coil
Wetted Surface
316L Electropolished Stainless Steel
2.5 kW to 9.0 kW (Dependent on Customer Voltage)
200 VAC to 480 VAC, 3-ph (Dependent on Wattage)
203°F (95°C)
Temperature Accuracy
±0.1°C (Contingent on Customer’s Facilitation)
0.5 GPM (1.9 LPM) to 32 GPM (122 LPM)
60 PSIG @ 95°C
10.29 years
Ethernet Read/Write (Other options available)
Get QuoteHeateflex Distributors