
概述
AP-FM系列的泵完全没有金属由PTFE和PFA制造。 最高允许工作压力4公斤(60 psi)最高工作温度100°C。 可以安全可靠的在一年的保修期内运行。 该泵可在四个型号AP 50 FM、AP 100 FM、AP 200 FM和AP 300的FM最大流量为20、55、68和115升/每分钟。
特点和优点
- 无金属PTFE/PFA液体路径
- 防漏的机加工设计
- 无橡胶O形圈、不漏水、无需紧固
- 变速机构中无润滑剂
- 无电机、无发热
- 气动可最大程度地减少液体的脉动和泵的振动
- 各种液体连接选项的
- 安全、无泄漏操作由于无金属设计
- 陶瓷中空气梭阀
- 最少的零件耐用的设计
- 100级洁净室装配、测试和封装
- 易于安装和维护
- 经过验证的可靠的200万元次行程周期
- 在一年的保修期内不会有任何预防性维护
温度范围
AP FM系列泵温度范围

PSH系列泵温度范围

对比泵
性能
AP50FM性能曲线

*Air Usage data intentionally removed due to changes in data collection method
PSH030性能曲线

尺寸
AP50FM尺寸图

PSH030尺寸图

规范
Model | AP50FM | |
---|---|---|
Warranty | 1 Year | 1 Year |
Max Flow Rate* | 20 lpm 5 gpm | 24.7 lpm 6.53 gpm |
Size of Air Connection | 1/4, 3/8 or 1/8 in FNPT | 1/4 in FNPT |
Displacement Per Cycle* | 0.076 liters 0.02 gal | 0.074 liters 0.019 gal |
Cycles Per Minute* | ≤ 270 | ≤ 333 |
Weight | 4.2 kg 9.4 lb | 3.3 kg 7.28 lb |
Suction Lift* | 1 m (3 ft) | 3 m (10 ft) |
Sound Pressure** | 69.38 dB(a) 76.55 dB(a) | 74.00 dB(a) 79.90 dB(a) |
Sound Power** | 58.52 dB(a) 65.75 dB(a) | 63.01 dB(a) 69.90 dB(a) |
Max Pressure | 4 Bar (60 psi) | 5.5 Bar (80 psi) |
Max Temperature | 100°C (212°F) | 145°C (293°F) |
Fluid Path Materials | PTFE / PFA | PTFE / PFA |
Non-Fluid Path Materials | PTFE / PFA / ceramic | PTFE / PFA / ceramic |
Stroke Detection Options | Fiber optic with or without sensor, or solid state pressure switch | |
Leak Detection Options | Fiber optic with or without sensor, or conductivity | |
Electronic Control | Available | |
Model | AP50FM |
*May vary depending on configuration. Suction lift diminishes over time. Recommended installation level less than 3 ft above source.
**dB Level at 60 psi 50CPM (top) and 60 psi maximum CPM (bottom). Sound Levels measured in accordance with ISO9614-2:1997.
Contact White Knight for details.
性能
AP100FM性能曲线

PSH060性能曲线

尺寸
AP100FM尺寸图

PSH060尺寸图

规范
Model | AP100FM | |
---|---|---|
Warranty | 1 Year | 2 Years |
Max Flow Rate* | 55 lpm 14 gpm | 58.3 lpm 15.40 gpm |
Size of Air Connection | 1/4 or 3/8 in FNPT | 1/4 in FNPT |
Displacement Per Cycle* | 0.189 liters 0.05 gal | 0.178 liters 0.047 gal |
Cycles Per Minute* | ≤ 300 | ≤ 348 |
Weight | 7.1 kg 15.6 lb | 7.3 kg 16.1 lb |
Suction Lift* | 1 m (3 ft) | 1 m (3 ft) |
Sound Pressure** | 72.38 dB(a) 79.12 dB(a) | 73.11 dB(a) 82.50 dB(a) |
Sound Power** | 64.31 dB(a) 71.98 dB(a) | 64.29 dB(a) 74.11 dB(a) |
Max Pressure | 4 Bar (60 psi) | 5.5 Bar (80 psi) |
Max Temperature | 100°C (212°F) | 145°C (293°F) |
Fluid Path Materials | PTFE / PFA | PTFE / PFA |
Non-Fluid Path Materials | PTFE / PFA / ceramic | PTFE / PFA / ceramic |
Stroke Detection Options | Fiber optic with or without sensor, or solid state pressure switch | |
Leak Detection Options | Fiber optic with or without sensor, or conductivity | |
Electronic Control | Available | |
Model | AP100FM |
*May vary depending on configuration. Suction lift diminishes over time. Recommended installation level less than 3 ft above source.
**dB Level at 60 psi 50CPM (top) and 60 psi maximum CPM (bottom). Sound Levels measured in accordance with ISO9614-2:1997.
Contact White Knight for details.
性能
AP200FM性能曲线

PSH060性能曲线

尺寸
AP200FM尺寸图

PSH060尺寸图

规范
Model | AP200FM | |
---|---|---|
Warranty | 1 Year | 2 Years |
Max Flow Rate* | 68 lpm 17 gpm | 58.3 lpm 15.40 gpm |
Size of Air Connection | 1/2 or 3/8 in FNPT | 1/4 in FNPT |
Displacement Per Cycle* | 0.454 liters 0.12 gal | 0.178 liters 0.047 gal |
Cycles Per Minute* | ≤ 150 | ≤ 348 |
Weight | 16.2 kg 35.8 lb | 7.3 kg 16.1 lb |
Suction Lift* | 1 m (3 ft) | 1 m (3 ft) |
Sound Pressure** | 74.80 dB(a) 82.31 dB(a) | 73.11 dB(a) 82.50 dB(a) |
Sound Power** | 69.24 dB(a) 77.17 dB(a) | 64.29 dB(a) 74.11 dB(a) |
Max Pressure | 4 Bar (60 psi) | 5.5 Bar (80 psi) |
Max Temperature | 100°C (212°F) | 145°C (293°F) |
Fluid Path Materials | PTFE / PFA | PTFE / PFA |
Non-Fluid Path Materials | PTFE / PFA / ceramic | PTFE / PFA / ceramic |
Stroke Detection Options | Fiber optic with or without sensor, or solid state pressure switch | |
Leak Detection Options | Fiber optic with or without sensor, or conductivity | |
Electronic Control | Available | |
Model | AP200FM |
*May vary depending on configuration. Suction lift diminishes over time. Recommended installation level less than 3 ft above source.
**dB Level at 60 psi 50CPM (top) and 60 psi maximum CPM (bottom). Sound Levels measured in accordance with ISO9614-2:1997.
Contact White Knight for details.
性能
AP300FM性能曲线

PSH140性能曲线

尺寸
AP300FM尺寸图

PSH140尺寸图

规范
Model | AP200FM | |
---|---|---|
Warranty | 1 Year | 2 Years |
Max Flow Rate* | 68 lpm 17 gpm | 118 lpm 31.3 gpm |
Size of Air Connection | 1/2 or 3/8 in FNPT | 3/8 in FNPT |
Displacement Per Cycle* | 0.454 liters 0.12 gal | 0.50 liters 0.132 gal |
Cycles Per Minute* | ≤ 150 | ≤ 254 |
Weight | 16.2 kg 35.8 lb | 18.5 kg 40.9 lb |
Suction Lift* | 1 m (3 ft) | 1 m (3 ft) |
Sound Pressure** | 74.80 dB(a) 82.31 dB(a) | 81.98 dB(a) 91.60 dB(a) |
Sound Power** | 69.24 dB(a) 77.17 dB(a) | 76.37 dB(a) 83.16 dB(a) |
Max Pressure | 4 Bar (60 psi) | 5.5 Bar (80 psi) |
Max Temperature | 100°C (212°F) | 145°C (293°F) |
Fluid Path Materials | PTFE / PFA | PTFE / PFA |
Non-Fluid Path Materials | PTFE / PFA / ceramic | PTFE / PFA / ceramic |
Stroke Detection Options | Fiber optic with or without sensor, or solid state pressure switch | |
Leak Detection Options | Fiber optic with or without sensor, or conductivity | |
Electronic Control | Available | |
Model | AP200FM |
*May vary depending on configuration. Suction lift diminishes over time. Recommended installation level less than 3 ft above source.
**dB Level at 60 psi 50CPM (top) and 60 psi maximum CPM (bottom). Sound Levels measured in accordance with ISO9614-2:1997.
Contact White Knight for details.
性能
AP300FM性能曲线

PSH140性能曲线

尺寸
AP300FM尺寸图

PSH140尺寸图

规范
Model | AP300FM | |
---|---|---|
Warranty | 1 Year | 2 Years |
Max Flow Rate* | 115 lpm 30 gpm | 118 lpm 31.3 gpm |
Size of Air Connection | 1/2 or 3/8 in FNPT | 3/8 in FNPT |
Displacement Per Cycle* | 0.719 liters 0.19 gal | 0.50 liters 0.132 gal |
Cycles Per Minute* | ≤ 160 | ≤ 254 |
Weight | 19.0 kg 41.8 lb | 18.5 kg 40.9 lb |
Suction Lift* | 1 m (3 ft) | 1 m (3 ft) |
Sound Pressure** | 74.80 dB(a) 82.31 dB(a) | 81.98 dB(a) 91.60 dB(a) |
Sound Power** | 69.24 dB(a) 77.17 dB(a) | 76.37 dB(a) 83.16 dB(a) |
Max Pressure | 4 Bar (60 psi) | 5.5 Bar (80 psi) |
Max Temperature | 100°C (212°F) | 145°C (293°F) |
Fluid Path Materials | PTFE / PFA | PTFE / PFA |
Non-Fluid Path Materials | PTFE / PFA / ceramic | PTFE / PFA / ceramic |
Stroke Detection Options | Fiber optic with or without sensor, or solid state pressure switch | |
Leak Detection Options | Fiber optic with or without sensor, or conductivity | |
Electronic Control | Available | |
Model | AP300FM |
*May vary depending on configuration. Suction lift diminishes over time. Recommended installation level less than 3 ft above source.
**dB Level at 60 psi 50CPM (top) and 60 psi maximum CPM (bottom). Sound Levels measured in accordance with ISO9614-2:1997.
Contact White Knight for details.