Overview
White Knight offers various liquid inlet and outlet fitting options, including Flaretek®, Tubing Out, Weldable, Pillar® 300 Super, Female NPT (FNPT) and Synchro-Flare™ in sizes ranging from 1/4-inch to 1-1/4-inch.
*All fittings are not available in all sizes.
Flaretek® Compatible
Sizes: 1/4, 3/8, 1/2, 3/4, 1, and 1-1/4 in.
Purebond® Weldable
Sizes: 1/2, 3/4, and 1 in.
Pillar® Super 300
Sizes: 1/2, 3/4, 1, and 1-1/4 in.
Sychro-Flare™
Sizes: 3/8, 1/2, 3/4, and 1 in.
Female NPT (FNPT)
Sizes: 1/4, 3/8, 1/2, 3/4, 1, and 1-1/4
Tubing Out
Sizes: 1/4, 3/8, 1/2, 3/4, 1, and 1-1/4 in.
Pump Compatibility
| Pump Models | 1/4 in. (0.25) |
3/8 in. (0.375) |
1/2 in. (0.5) |
3/4 in. (0.75) |
1 in. (1.0) |
1-1/4 in. (1.25) |
|---|---|---|---|---|---|---|
*All fittings are not available in all sizes.
| Legacy Models | 1/4 in. (0.25) |
3/8 in. (0.375) |
1/2 in. (0.5) |
3/4 in. (0.75) |
1 in. (1.0) |
1-1/4 in. (1.25) |
|---|---|---|---|---|---|---|
| AT50 | ||||||
| AP40EXT3 | ||||||
| AP50 | ||||||
| AP50FM | ||||||
| X50 | ||||||
| PL30 | ||||||
| PX30 | ||||||
| PLF30 | ||||||
| Legacy Models | 1/4 in. (0.25) |
3/8 in. (0.375) |
1/2 in. (0.5) |
3/4 in. (0.75) |
1 in. (1.0) |
1-1/4 in. (1.25) |
| AT100 | ||||||
| AP100 | ||||||
| AP100FM | ||||||
| X100 | ||||||
| PL60 | ||||||
| PX60 | ||||||
| PLF60 | ||||||
| Legacy Models | 1/4 in. (0.25) |
3/8 in. (0.375) |
1/2 in. (0.5) |
3/4 in. (0.75) |
1 in. (1.0) |
1-1/4 in. (1.25) |
| AT300HD | ||||||
| AP200 | ||||||
| AP300 | ||||||
| AP200FM | ||||||
| AP300FM | ||||||
| PL120 | ||||||
| PX120 | ||||||
| PLF120 | ||||||
| Legacy Models | 1/4 in. (0.25) |
3/8 in. (0.375) |
1/2 in. (0.5) |
3/4 in. (0.75) |
1 in. (1.0) |
1-1/4 in. (1.25) |
*All fittings are not available in all sizes.
Pulse Dampener Compatibility
iPolymer Fittings
iPolymer offers an extensive line of PTFE fittings, including Flare, Compression, NPT, Flange, Barbed and more. All of our fittings are machined from 100% virgin PTFE. iPolymer’s PTFE Flare fittings feature Fit-Line Global™ PVDF Flare Nuts that can be used with Fit-Line’s TruFASTEN™ torque wrenches. In addition to our standard fitting line, iPolymer can custom manufacture fittings to your exact sizing and configuration requirements with an exceptionally quick turn-around time.
iPolymer Fittings & Connectors
Materials of Construction
- Fittings and Ferrules are machined virgin PTFE
- Two-piece Ferrule-Gripper assemblies are PVDF
- “HA” style Nuts are molded PVDF
Pressure Ratings
- Temperatures at or below 22ºC (72ºF): 120 psi for 1/16” fittings linear decreasing to 80 psi for 3/4” fittings and 60 psi for fittings larger than 3/4”<//li>
- Temperatures elevated from 22ºC (72ºF) to 85ºC (185ºF): 90 psi for 1/16” fittings linear decreasing to 60 psi for 3/4” fittings and 40 psi for fittings larger than 3/4”
- Contact factory for temperature ratings above 85ºC / 185ºF
Pressure performance ratings are based on laboratory testing, industry standard material characteristics, and historical data. A combination of extreme temperature and pressure may affect these products. The user is responsible for verifying the suitability of these products for their application.
Ferrule & Gripper Style
- Cut tubing to desired length
- Loosen nut and insert tube
- Tighten nut finger tight
- Fitting is ready for use
Flared End Style
